ENTER FROM PAGE 22 HERE
Plug is in the bottom of the filter pan or in the line from the filter to the pump.
Disconnect the tubing from the filter pan to the motor. Make sure the pipe is cool.
Try blowing air through it.
Can you
blow air through No it?
Yes
The line is clear. Reconnect hose to the pump inlet.
Does oil | No |
flow? |
|
Yes |
|
Conduct normal filter operations.
Soak the line in hot water until you can blow through it.
This line is clogged.
There may be a plug in the bottom of the filter pan.
Take filter pack apart, then scrub the bottom of the pan and clean the intake pipe to remove residual shortening.
Reassemble the filter pack. Then turn pump motor "ON".
|
|
| Go to page 22 and |
Does oil flow? | No | follow Pump | |
| troubleshooting | ||
| |||
|
|
| procedures. |
| Yes |
|
|
|
|
| |
|
|
|
|
Conduct normal filter |
|
| |
operations. |
|
|
23