149
Settings
Choose the rate (2 frames/s or 1 frame/s) at which
pictures can be taken in continuous low-speed mode.
MEMO
The frame advance rate may drop at slow shutter speeds
and at [ D-RANGE] setting other than [100% (STD)].
Select [ON] to delay shutter release until about 0.4 s after
the shutter button is pressed, reducing camera shake in
situations in which the least camera movement could
result in blurred photographs (for example, microscope
photography).
See p.101 for details.
Normally, select [ON] to playback images quickly in the
LCD monitor (or [OFF] to playback images slowly). With
any software application, If you encounter some
difficulties with playback or printing of images with [ON]
selected, select [OFF].
DISPLAY
Use this setting to specify how to display images on the
LCD after shooting in order to check the result.
[CONTINUOUS]
The results are always displayed after you shoot. Then
images are automatically recorded.
Press the shutter button or MENU/OK to take another
picture.
[4 SEC], [2 SEC]
The image appears for about 4 or 2 seconds and is
then recorded.
[OFF]
The photographed image is automatically recorded
without being displayed.
This option controls the control panel backlight (LCD
illuminator).
[OFF]
Control panel illuminates only while power switch is
rotated to position.
[ON]
Backlight stays lit (note that this increases battery
drain).
SHOOTING SPEED
EXPOSURE DELAY MODE
SELF-TIMER
QUICK PREVIEW DATA
IMAGE DISPLAY
ILLUMINATION
How to use the SET UP menu (➝p.138)