181
Settings
When this function is active and the camera remains
unused for a pre-determined amount of time (15sec/
30sec/1min/2min/5min/10min), the camera automatically
shuts down (standby status). The viewfinder display, the
aperture and shutter speed indicators in the control panel
will turn off in standby status.
Use this function when you want to get the maximum
possible running time from your battery.
CAUTION
The auto power save function is disabled during a slide
show (➝p.133), when a printer or a PC is connected
(➝p.183, 194), and when the AC power adapter is being
used.
MEMO
Press w or the shutter button halfway to return the
camera back to ready status.
Controls the pitch of the beep that sounds when the self-
timer is counting down or the camera is focusing.
[LOW] Low pitch beep
[HIGH] High pitch beep
[OFF] No beep
MEMO
When [LOW] or [HIGH] is selected, beep indicator is
displayed in the control panel.
Specifies whether video output is set to [NTSC] or [PAL].
Returns all camera settings (other than [] PRESET
CUSTOM], [DATE/TIME], [ ] and [VIDEO
SYSTEM]) to their factory default values.
AUTO POWER SAVE BEEP
VIDEO SYSTEM
SET-UP RESET
How to use the SET UP menu (➝p.138)