194
Connecting to a PC
By connecting the camera to a PC, your system can be
expanded to fill a wide range of uses. Using
“FinePixViewer” performs images saving, browsing and
file management etc.
MEMO
If the power cuts out during data transmission, the data
will not be transmitted correctly. Always use the AC power
adapter when connecting the camera to a PC.
CAUTION
• Do not format the memory card in the camera on the
PC.
• Use the memory card with images taken by a FUJIFILM
Digital camera.
• When connecting to a PC, if the memory card contains
large images, connection or transmission may take time
or images may not be stored.
AInsert the memory card with images into the camera
(➝p.34).
BTurn the power switch to ON to turn the camera on.
CD-ROM
(Software for FinePix CX)
Refer to Software
Installation (➝p.188, 191)
the first time you connect
the camera to your PC.
Install the software first. Do
not connect the camera to
the PC before installing all
the software.
CSelect [ MTP(PTP)] for [USB MODE] under
[ SYSTEM] in the [SET UP] menu.
See “Using the [SET UP] menu” (➝p.138).
DTurn the power switch to OFF to turn the camera off.
EConnect the camera to your PC using the USB cable
(mini-B).
FSet the Power switch to ON to turn the camera on.
FRAME NO.
FRAME NO.
FORMAT
FORMAT
USB MODE
USB MODE
BEEP
BEEP
VIDEO SYSTEM
VIDEO SYSTEM
LOW
LOW
NTSC
NTSC
AUTO POWER OFF
AUTO POWER OFF
SYSTEM
SYSTEM
PC SHOOT. AUTO
PC SHOOT. AUTO
MTP
MTP
(PTP
PTP
)
PC SHOOT. FIXED
PC SHOOT. FIXED
HELP
HELP
;USB socket