97
Advanced Features — Photography
CHOOSE COLOR TEMP.
For taking a picture in daylight without flash or artificial
light, such as taking a landscape, you can specify color
temperature to set white balance. When CHOOSE
COLOR TEMP. is selected for the white balance setting,
you can specify color temperature by specifying a
numeric value. When taking a picture with flash or
fluorescent light, select dFLASH mode or
FLUORESCENT mode respectively.
ZSetting the color temparture in the [SHOOTING
MENU]
ZSetting the color temperature using WB and the
command dials
AWhile pressing WB, rotate the main-command dial until
is displayed in the control panel.
BWhile pressing WB, rotate the sub-command dial until
the desired value is displayed.
MEMO
• The camera may not produce the desired white
balance, even when the numeric value measured by an
external color temperature meter is applied on the
camera. Take a test shot to determine if the selected
value is appropriate to the light source.
ASelect the [ CHOOSE COLOR TEMP.] under [T
WHITE BALANCE] in the [SHOOTING MENU].
See “Setting the [SHOOTING MENU]” (➝p.108).
BPress n or o to select the desired color
temperature.
CPress MENU/OK.
CHOOSE COLOR TEMP.
CHOOSE COLOR TEMP.
FINE
FINE
FLASH
FLASH
SHADE
SHADE
FLUORESCENT LAMP-5
FLUORESCENT LAMP-5
PRESET CUSTOM 1
PRESET CUSTOM 1
5600K
5600K
WHITE BALANCE
WHITE BALANCE
5900K
5900K
6700K
6700K
7100K
7100K
7700K
7700K
6300K
6300K