Fujitsu 1200 manual System Features, Icon System Function

The following table describes the appearance of individual icons in the Status display and the status indicated when the icon is displayed. (If an icon is not displayed, it indicates that the related system function is off or inactive.)

System Features

Icon		System Function
Power icon.	Continuous:	System on (running).
Indicates system	Blinking:	Suspend-to-RAM mode.
state.	Not displayed: System in Fully Off state or
		Suspend-to-Disk mode.
	See “System States” in Chapter 2 for more details.
DC Input icon.	Displayed when DC power is connected and the Power switch
	is in the On position, or the system is charging.
Charging icon	Continuous:	Battery charging.
(arrow displayed	Blinking:	Battery temperature too high, charging stopped.
near Battery	Not displayed: Battery not charging.
Gauge icon).
Battery Gauge	Charge 90% or higher
icon.
This icon	Charge 75% or higher
displays a
number of “cells”
	Charge 50% or higher
to indicate the
status of the
battery pack.	Charge 25% or higher
(Displayed when
Power switch is
	Continuous:	12% - 25% charge.
on or battery
	Blinking cell:	Less than 12% charge (low battery warning).
pack is
charging.)	Critically low battery charge. (System operation is suspended
	automatically.)
	Cell short fault. Battery pack is bad.
Hard Disk Drive	Displayed when IDE hard disk drive is active.
Access icon.
PC Card Access	Icon 1:	Displayed when PC Card slot 1 is active.
icons.	Icon 2:	Displayed when PC Card slot 2 is active.

Status Display 1-5