Fujitsu 1200 manual Shutting Down the System, Suspending System Operation

Shutting Down the System

Follow these steps to shut down and turn off your system:

1.If system operation is suspended, resume system operation. See “Resuming System Operation” later in this chapter for details.

2.Save your work and close all running programs.

3.Choose one of the following:

•Windows for Workgroups users: Exit Windows.

•Windows 95 and Windows NT users: Choose Shut Down from the Start menu and carry out the Shut Down command.

4.Turn off the Power switch.

The system is now in the Fully Off state. Note that some operating systems, such as Windows 95, turn off the system automatically when you carry out the Shut Down command. If this is the case, you can choose to leave the Power switch in the On position. If you choose to do so, the Battery Gauge icon is displayed in the Status display and your system will restart when you press the Suspend/Resume button if it is configured to do so.

Suspending System Operation

The Stylistic 1200 pen tablet allows you to suspend system operation without closing programs or exiting the operating system. Use this feature to conserve battery power when performing a system shutdown is inconvenient.

To suspend system operation:

1.Press the Suspend/Resume button, or carry out the Suspend command from your operating system or power management program. (If your system is configured to suspend operation using Suspend-to-Disk mode, which is explained later in this procedure, a message is displayed while data is saved to your hard disk drive.)

Caution

If you are replacing the battery pack, wait until system operation is suspended before you remove the battery pack. This prevents losing your unsaved data.

2-6 Using the Stylistic 1200 Pen Tablet