Fujitsu 1200 manual Replacing the Pen Battery

Models: 1200

1 38
Download 38 pages 59.22 Kb
Page 30
Image 30
Replacing the Pen Battery

Replacing the Pen Battery

The pen battery has a typical life of about 1 year under normal use. More frequent use will shorten battery life. The pen uses one size AAAA 1.5 volt alkaline battery. If your system does not respond to the pen, or your pen is producing unpredictable results, replace the pen battery. To do so:

1. Open the pen by twisting the pen barrel counterclockwise.

AAAA Battery

Pen Barrel

Spring

Polarity Icon

2.Remove the battery from the pen barrel.

3.Observing the polarity mark, insert a new battery into the pen barrel. (Insert the end of the battery with the negative terminal first.)

Note: You do not need to remove the spring from the pen barrel when you replace the battery; however, if the spring does come out of the pen barrel when you remove the battery, insert the spring into the pen barrel, as shown in the illustration, before you insert the new battery.

4. Close the pen by twisting the pen barrel clockwise.

You can now use the pen as you normally would. You can obtain a replacement

AAAAbattery from your local battery reseller or order directly from the following sources:

Duracell, Inc. (800) 680-1993 Duracell product number MN2500

Eveready Battery Company, Inc. (800) 383-7323 Eveready model number E96

3-4

Care and Maintenance

Page 30
Image 30
Fujitsu 1200 manual Replacing the Pen Battery