Fujitsu 1200 manual Pen Tablet Is Not Responding to the Pen, Cursor Is Not Tracking Pen

Models: 1200

1 38
Download 38 pages 59.22 Kb
Page 34
Image 34

Pen Tablet Is Not Responding to the Pen

If your pen tablet is not responding to the pen, check the following:

Ensure that the pen tip moves freely. Replace the pen tip if it is damaged or warped. See “Replacing the Pen Tip” earlier in this chapter.

Ensure that the pen battery is in good condition. Replace the pen battery if the age or condition of the battery is suspect. See “Replacing the Pen Battery” earlier in this chapter.

Cursor Is Not Tracking Pen

If the cursor on the screen is not accurately tracking the pen or appears to be misaligned with the pen, calibrate the pen. See “Calibrating the Pen” earlier in this chapter for details.

Audio Volume Too Low

If the audio volume on your pen tablet speaker or external headphones is too low, check the following:

Ensure that the speaker (or headphone output if using headphones) is enabled. To do so, tap the Speaker Mute hotpad. The system beeps when the speaker or heaphone output is turned on using the Speaker Mute hotpad.

Ensure that the volume level set with the Volume hotpads is set to an audible level.

Ensure that any volume control in your audio program software is set to an audible level.

3-8

Care and Maintenance

Page 34
Image 34
Fujitsu 1200 manual Pen Tablet Is Not Responding to the Pen, Cursor Is Not Tracking Pen, Audio Volume Too Low