Figure 2-20. Dragging on the Touch Screen
Right-clicking
It is possible for you to perform
1.Click Start
2.When the Right Button Tool screen appears, select either “Hold [Ctl] key down and touch the screen” or “Press [Ctl] key and touch the screen”.
When you select “Hold [Ctl]...”, the stylus will act as a right mouse button when you hold down the control key while touching the screen.
When you select “Press [Ctl]...”, pressing the control key before touching the screen will cause the stylus to act as a right mouse button.
3.Click [Apply] to complete your selection.
G e t t i n g t o K n o w Y o u r L i f e B o o k
Calibrating the Touch Screen
In order to ensure accurate tracking between the stylus and cursor, you should run the Touch Screen Calibra- tion Utility before you use the touch screen for the first time, or after you change the display resolution.
To run the calibration utility:
1.Go to [Start]
2.Select the Calibration tab and click the [Calibrate Now] button.
3.Adjust the display of your notebook to a comfortable angle and find the red (+) symbol in the
4.Using the stylus, touch the screen directly on the (+) symbol, then lift the stylus. When you lift the stylus tip, the (+) symbol will move to the next location.
4.Repeat step 4 until you have selected a total of nine symbols. This is the minimum number of points necessary to calibrate your touch screen.
5.Once you have selected the nine symbols, click the [Update] button to return to the Touch Panel Settings screen.
19