Fujitsu C120-E276-11ENZ0(A) , - 1. , 2. , -

SE0X7GD1X

name fjgi

parent /pci@3,700000/pci@0

unit-address instance 6 is 4

instance 7 is 4,1

SE0X7GQ2X

name fjgi

parent /pci@4,600000/pci@0 /pci@4,600000/pci@0,1

unit-address instance 8 is 4

instance 9 is 4,1

instance 10 is 6

instance 11 is 6,1

-The location of the fjgi.conf file depends on the model of the host system as described below:

1. SPARC Enterprise Txxxx series and SPARC T3 series

/platform/sun4v/kernel/drv/fjgi.conf

2. SPARC Enterprise Mxxxx series

/platform/SUNW,SPARC-Enterprise/kernel/drv/fjgi.conf

-Examples of setting parameters in the fjgi.conf file are shown below.

Example 1: The parameters for fjgi0 (the instance number 0 port of SE0X7GQ1X (10/100/1000BASE-T)) is set to "Auto-Negotiation

is disabled", "Connect at 100Mbps" and "Half-Duplex operation is enabled".

The parameter values need to be set by a character string like name="fjgi", parent="/pci@1,700000/pci@0", unit-address="4",

AutoNegotiation_A="Off", LinkSpeed_A="100", DuplexCapabilities_A="Half".

The following is added to the fjgi.conf file:

name="fjgi" parent="/pci@1,700000/pci@0" unit-address="4"

AutoNegotiation_A="Off" LinkSpeed_A="100" DuplexCapabilities_A="Half";

Example 2: The parameters for fjgi4 (the instance number 4 port of SE0X7GD2X (1000BASE-SX)) is set to "Auto-Negotiation is

enabled", "Connect at 100Mbps" and "Full-Duplex operation is enabled".

The parameter values need to be set by a character string like name="fjgi", parent="/pci@2,600000/pci@0", unit-address="4",

AutoNegotiation_A="On", LinkSpeed_A="100", DuplexCapabilities_A="Full".

The following is added to the fjgi.conf file:

name="fjgi" parent="/pci@2,600000/pci@0" unit-address="4"

AutoNegotiation_A="On" LinkSpeed_A="100" DuplexCapabilities_A="Full";

Example 3: The MTU parameter for fjgi9 (the instance number 9 port of SE0X7GQ2X (10/100/1000BASE-T)) is set to 8000.

The parameter value needs to be set by numerical value like fjgi_mtu=8000.

The following is added to the fjgi.conf file:

name="fjgi" parent="/pci@4,600000/pci@0" unit-address="4,1"

fjgi_mtu=8000;

- 24 -

Contents

Main Preface Revision History Page Contents Page Chapter 1 Product Outline 1.1 Key Features 1.2 Gigabit Ethernet Card Specifications 1.2.1 Specifications 1.2.2 Part Names and Features of Hardware Page Page Chapter 2 Gigabit Ethernet Card Installation 2.1 Installation of the Gigabit Ethernet Card 2.2 Identifying the Gigabit Ethernet Card 2.3 Cable Connection Page Page Page Page Chapter 3 Setting Instructions - - - - - - - 3.1 Driver Software Installation 3.2 Identification of Interface Name 3.3 Environment Setting 3.3.1 Environment Setting of IPv4 Interfaces 3. 4. 1. - 3.3.2 Environment Setting of IPv6 Interfaces fjgi* 1. fjgi* 2. 3.4 Identification of the Gigabit Ethernet Card - Identification of the Gigabit Ethernet Card Types and Instance Number - Identification of Slots with Installed Gigabit Ethernet Cards 3.5 Operation Mode Setup 3.5.1 Setting the fjgi.conf File Page * [Parameter Setting] - 1. 2. Page - - Method 2: Setting method of old style [Parameter List] [Parameter Setting] - - - - 1. 2. - - 3.5.2 JumboFrame Setup Page 3.5.3 Using the ndd(1M) command - after - How to Use the ndd(1M) Command - - The ndd(1M) Command Parameters Page - - - - - - 3.5.4 Using the dladm(1M) command Page - - - - - - - - 3.5.5 FCode Settings - - FCode Settings (Auto-Negotiation Mode)"), or after power cycling the system. - 36 - 3.6 Network Installation 3.7 VLAN Interface Setup 3.7.1 IEEE 802.1Q TagVLAN 3.7.2 Setting Up the VLAN Interface - - - - - Chapter 4 LinkAggregation Feature 4.1 About LinkAggregation Feature - - Data Distribution Mode Table 4.2 Data Distribution Mode - LACP Mode Table 4.3 LACP Mode 4.2 Configuration of the LinkAggregation Feature 4.2.1 Setting and Displaying the Configuration with the dladm(1M) Command 4.2.1.1 Create a LinkAggregation (dladm create-aggr) Page Page Page 4.2.1.2 Delete a LinkAggregation (dladm delete-aggr) 4.2.1.3 Modify a LinkAggregation (dladm modify-aggr) Page 4.2.1.4 Add Interfaces to a LinkAggregation (dladm add-aggr) 4.2.1.5 Remove Interfaces from a LinkAggregation (dladm remove-aggr) Page 4.2.1.6 Display LinkAggregation Statistics and Information (dladm show-aggr) Page - - 4.3 Notes Chapter 5 Troubleshooting Appendix A Messages A.1 Console Messages from the Driver Table A.1 Console Messages(NOTICE) from the FUJITSU PCI GigabitEthernet Driver Table A.2 Console Messages(WARNING) from the FUJITSU PCI GigabitEthernet Driver Table A.3 Console Messages from the FUJITSU PCI GigabitEthernet Driver Page Table A.4 Messages Reported by Machine Administration Appendix B Gigabit Ethernet Card LED Diagnosis B.1 Location and Meaning of the LEDs Page Page Page Appendix C Using FUJITSU PCI GigabitEthernet in a Cluster Environment C.1 Cluster Environment Support C.2 Cluster Environment Setup Procedure C.3 Notes Appendix D Using FUJITSU PCI GigabitEthernet in Solaris Containers D.1 Solaris Containers Support - - D.2 Solaris Containers Setup Procedure - - - 68 - Example: Removing fjgi0 from a Shared-IP Non-Global Zone (zone1). - Example: Adding fjgi2 to an Exclusive-IP Non-Global Zone (zone2). D.3 Notes Page Page - Appendix E Using FUJITSU PCI GigabitEthernet in Oracle VM Server for SPARC E.1 Oracle VM Server for SPARC Support E.2 Oracle VM Server for SPARC Setup Procedure - E.3 Notes - - 75 - of Oracle Documentation. Appendix F Using FUJITSU PCI GigabitEthernet in Solaris 11 Network Virtualization F.1 Solaris 11 Network Virtualization Support - - F.2 Solaris 11 Network Virtualization Setup Procedure Page - F.3 Notes - Appendix G PCI Slot Number and Device Name Page Page - SPARC Enterprise M8000/M9000 Page Page - SPARC Enterprise T1000 - SPARC Enterprise T2000