Fujitsu C120-E276-11ENZ0(A) -, , -

-The following example shows how to display the detailed LinkAggregation Information for the "key=1" LinkAggregation Group:

# /usr/sbin/dladm show-aggr -L 1

key: 1 (0x0001) policy: L4 address: 0:0:77:9f:3c:d5 (auto)

LACP mode: active LACP timer: short

device activity timeout aggregatable sync coll dist defaulted expired

fjgi1 active short yes yes yes yes no no

fjgi2 active short yes yes yes yes no no

fjgi3 active short yes yes yes yes no no

-The following example shows how to display the statistics for the "key=1" LinkAggregation Group:

# /usr/sbin/dladm show-aggr -s 1

key: 1 ipackets rbytes opackets obytes %ipkts %opkts

Total 2474 245586 0 0

fjgi1 1237 122793 0 0 50.0 -

fjgi2 1237 122793 0 0 50.0 -

fjgi3 0 0 0 0 0.0 -

-Solaris 11

-The following example shows how to display the LinkAggregation Information for the "aggr-link=aggr1" LinkAggregation Group:

# dladm show-aggr aggr1

LINK POLICY ADDRPOLICY LACPACTIVITY LACPTIMER FLAGS

aggr1 L4 auto active short -----

-The following example shows how to display the detailed LinkAggregation Information for the " aggr-link=aggr1"

LinkAggregation Group:

# dladm show-aggr -L aggr1

LINK PORT AGGREGATABLE SYNC COLL DIST DEFAULTED EXPIRED

aggr1 net2 yes yes yes yes no no

-- net3 yes yes yes yes no no

-- net4 yes yes yes yes no no

*: net2, net3, and net4 are the vanity name of fjgi0, fjgi1, and fjgi2, respectively.

-The following example shows how to display the extended LinkAggregation Information for the " aggr-link=aggr1"

LinkAggregation Group:

# dladm show-aggr -x aggr1

LINK PORT SPEED DUPLEX STATE ADDRESS PORTSTATE

aggr1 -- 1000Mb full up 0:0:77:9f:3e:d5 --

net2 1000Mb full up 0:0:77:9f:3e:d5 attached

net3 1000Mb full up 0:0:77:9f:3e:d6 attached

net4 1000Mb full up 0:0:77:9f:3e:d7 attached

*: net2, net3, and net4 are the vanity name of fjgi0, fjgi1, and fjgi2, respectively.

Information

-The following example shows how to display the statistics for the " aggr-link=aggr1" LinkAggregation Group:

# dlstat show-aggr aggr1

LINK PORT IPKTS RBYTES OPKTS OBYTES

aggr1 -- 371 47.73K 447 56.96K

aggr1 net2 125 16.09K 152 19.20K

- 55 -

Contents

Main Preface Revision History Page Contents Page Chapter 1 Product Outline 1.1 Key Features 1.2 Gigabit Ethernet Card Specifications 1.2.1 Specifications 1.2.2 Part Names and Features of Hardware Page Page Chapter 2 Gigabit Ethernet Card Installation 2.1 Installation of the Gigabit Ethernet Card 2.2 Identifying the Gigabit Ethernet Card 2.3 Cable Connection Page Page Page Page Chapter 3 Setting Instructions - - - - - - - 3.1 Driver Software Installation 3.2 Identification of Interface Name 3.3 Environment Setting 3.3.1 Environment Setting of IPv4 Interfaces 3. 4. 1. - 3.3.2 Environment Setting of IPv6 Interfaces fjgi* 1. fjgi* 2. 3.4 Identification of the Gigabit Ethernet Card - Identification of the Gigabit Ethernet Card Types and Instance Number - Identification of Slots with Installed Gigabit Ethernet Cards 3.5 Operation Mode Setup 3.5.1 Setting the fjgi.conf File Page * [Parameter Setting] - 1. 2. Page - - Method 2: Setting method of old style [Parameter List] [Parameter Setting] - - - - 1. 2. - - 3.5.2 JumboFrame Setup Page 3.5.3 Using the ndd(1M) command - after - How to Use the ndd(1M) Command - - The ndd(1M) Command Parameters Page - - - - - - 3.5.4 Using the dladm(1M) command Page - - - - - - - - 3.5.5 FCode Settings - - FCode Settings (Auto-Negotiation Mode)"), or after power cycling the system. - 36 - 3.6 Network Installation 3.7 VLAN Interface Setup 3.7.1 IEEE 802.1Q TagVLAN 3.7.2 Setting Up the VLAN Interface - - - - - Chapter 4 LinkAggregation Feature 4.1 About LinkAggregation Feature - - Data Distribution Mode Table 4.2 Data Distribution Mode - LACP Mode Table 4.3 LACP Mode 4.2 Configuration of the LinkAggregation Feature 4.2.1 Setting and Displaying the Configuration with the dladm(1M) Command 4.2.1.1 Create a LinkAggregation (dladm create-aggr) Page Page Page 4.2.1.2 Delete a LinkAggregation (dladm delete-aggr) 4.2.1.3 Modify a LinkAggregation (dladm modify-aggr) Page 4.2.1.4 Add Interfaces to a LinkAggregation (dladm add-aggr) 4.2.1.5 Remove Interfaces from a LinkAggregation (dladm remove-aggr) Page 4.2.1.6 Display LinkAggregation Statistics and Information (dladm show-aggr) Page - - 4.3 Notes Chapter 5 Troubleshooting Appendix A Messages A.1 Console Messages from the Driver Table A.1 Console Messages(NOTICE) from the FUJITSU PCI GigabitEthernet Driver Table A.2 Console Messages(WARNING) from the FUJITSU PCI GigabitEthernet Driver Table A.3 Console Messages from the FUJITSU PCI GigabitEthernet Driver Page Table A.4 Messages Reported by Machine Administration Appendix B Gigabit Ethernet Card LED Diagnosis B.1 Location and Meaning of the LEDs Page Page Page Appendix C Using FUJITSU PCI GigabitEthernet in a Cluster Environment C.1 Cluster Environment Support C.2 Cluster Environment Setup Procedure C.3 Notes Appendix D Using FUJITSU PCI GigabitEthernet in Solaris Containers D.1 Solaris Containers Support - - D.2 Solaris Containers Setup Procedure - - - 68 - Example: Removing fjgi0 from a Shared-IP Non-Global Zone (zone1). - Example: Adding fjgi2 to an Exclusive-IP Non-Global Zone (zone2). D.3 Notes Page Page - Appendix E Using FUJITSU PCI GigabitEthernet in Oracle VM Server for SPARC E.1 Oracle VM Server for SPARC Support E.2 Oracle VM Server for SPARC Setup Procedure - E.3 Notes - - 75 - of Oracle Documentation. Appendix F Using FUJITSU PCI GigabitEthernet in Solaris 11 Network Virtualization F.1 Solaris 11 Network Virtualization Support - - F.2 Solaris 11 Network Virtualization Setup Procedure Page - F.3 Notes - Appendix G PCI Slot Number and Device Name Page Page - SPARC Enterprise M8000/M9000 Page Page - SPARC Enterprise T1000 - SPARC Enterprise T2000