MMB CLI (Command Line Interface) Operations
The specified parameter is invalid
Unable to execute this command on a standby MMB.
Failed to get the firmware version.
The checksum of the firmware file is invalid.
The size of the firmware file is invalid.
The CRC of the firmware file is invalid.
Specified file is NOT a Firmware file.
Specified host does NOT respond.
Unable to execute the update under maintenance.
Current firmware is newer version.
Unable to execute the online update.
Please try the update after the system power off.
Unable to execute the update. TPM is effective.
Unable to execute the update. Standby MMB is fault or disable.
Unable to execute Firmware Update due to resource lock.
Please retry after waiting a while.
The firmware is being updated now.
The chassis information could not be retrieved.
The chassis information is invalid.
(5) Process
MMB checks whether the firmware update of online is executable. When it is not possible to execute it,
the error message is output and the update processing is interrupted.
The condition that firmware update of online becomes improper:
MMB is an unredundant configuration.
There is no combination in the interchangeability table between the farm version numbers that
can be updated firmware online.
- Without the force option specified:
The general firmware version to be applied is compared with that in use. If the version to be applied is
the same or older than that in use, the command does not update the firmware.
Also, the versions of the individual firmware instances are checked. If the version to be applied is the
same as that of a firmware instance, the command does not update the firmware instance. In other
words, the command updates the firmware instance only if the versions are different.
- With the force option specified:
The general firmware version to be applied is not compared with that in use. The command forcibly
updates the current firmware with the applicable firmware version.
The online firmware update cannot specify force for an option.
2.4.2 show update_status
The show update_status command displays the version of the firmware being batch-updated as well as the
update progress.
The possible status is as follows:
- completed: Normal end
- failed: Abnormal end
- updating: Firmware update in progress (percentage displayed)
- being updated: Firmware update in progress (firmware being downloaded)
- not executed: Firmware update not started

Privilege: Administrator or CE

(1) Input format
show update_status