MMB CLI (Command Line Interface) Operations
2.6.7 set memory_mirror_ras_mode
It sets the Memory Mirror RAS mode of the system.
Memory Operation Mode can be set only at the time of Mirror Mode settings. Default value is set to
mirror_keep (RAS emphasized mode).
mirror_keep : Mirror mode is maintained
capacity_keep : Capacity of the memory is maintained.
For the syetm which is already powered ON, when the settings are performed by this command, following
message is displayed and settings cannot be performed.
“Unable to change the mode while the system is running.
Please try to change the mode after the system is shutdown.”
For the system which is already powered OFF, when the settings are changed by this command, power
OFF/ON is not required. The value which is set is reflected instantly instead of displaying the above-
mentioned message.
Moreover, also when values which are the same as the current values are set, power ff/on is not required
and the above-mentioned message is not displayed.
Privilege: Administrator, Operator
(1) Input format
set memory_mirror_ras_mode [mirror_keep |capacity_keep ] {quiet}
(2) Option
quiet: Message is not displayed.
(3) Usage example
Example: When setting Memory Mirror RAS Mode of the system to Mirror Keep Mode
# set memory_mirror_ras_mode mirror_keep
The setting will become effective the next time the system power off/on is performed
#
(4) Message
The following table lists the messages which are displayed in this CLI.
For details of the messages, see the PRIMEQUEST 2000 Series Message Reference (C122-E178EN).
The setting will become effective the next time the system power off/on is performed.
The specified parameter is invalid.
Unable to register the System as Mirror Mode enable because the CPU mismatch between SBs.
Unable to register the System as Mirror Mode enable because the DIMM does not satisfy requirements of
Mirror Mode.
Unable to register the System as Mirror Mode enable because the unsupported CPU configuration.
Unable to register the System as Mirror Mode enable because of abnormal CPU composition.
Unable to register the System as Mirror Mode enable because of abnormal DIMM composition.
Unable to register the System as Mirror Mode enable because of abnormal SB composition.
Unable to register the System as Mirror Mode enable because of abnormal VRM composition.
Failed to execute %s command.
Failed to execute set memory_mirror_ras_mode command.
Unable to change the mode while the system is running.
Please try to change the mode after the system is shutdown.
Unable to execute this command because you have not authority to operate this system.
System Configuration Failed.