Button/LED Function
Name of the button | Function | |
and LED |
| |
|
|
|
Button | Next | Displays the next screen. |
|
|
|
| Previous | Displays the previous screen. |
|
|
|
|
| Moves cursor to the left. |
|
|
|
|
| Moves cursor to the right. |
|
|
|
| Exit | • When you are entering settings on the operator panel, pressing this button |
|
| immediately returns you to the “Scanner Ready” screen. |
|
|
|
| Enter | Records parameter currently selected by cursor. |
|
|
|
| Send To/ | Operational only when Manual start mode is set or “Read” lamp lights; |
| Start | starts the reading when video interface option is used. Some of application |
|
| Softwares Use this button. |
|
|
|
| Stop | • When “Check” LED lights, pressing this button releases error status (turn |
|
| off “Check” and returns to “Scanner Ready” screen). |
|
| Operational only during reading operation; stops the reading when video |
|
| interface option is used. |
|
| Also turns off “Check” lamp. |
|
|
|
LED |
| Indicates that the scanner is ON. |
|
|
|
| Read | Indicates that the scanner is reading or ready to read. |
|
|
|
| Check | • If it lights, means that an alarm occurred. Pressing “Stop” button turns |
|
| “Check” lamp off. |
|
| • If it blinks at one second intervals, means that a jam or double feed has |
|
| been detected. With jammed paper, removing the jammed paper turns off |
|
| “Check” lamp. With a double feed, pressing “Stop” button turns off “Check” |
|
| lamp. |
|
| • If blinks at four seconds intervals, means that cleaning the ADF is |
|
| necessary. |
|
|
|
