Fujitsu C150-E146-02EN manual Basic Product Specification, Specification Remarks

Basic Product Specification

No.	Item		Specification	Remarks
1	Operating method		ADF (Duplex), Flatbed
2	Image sensor		CCD x2	Front/Back
3	Light source		Inert Gas (Xenon) Lamp x2	Green
4	Document	Minimum	A8 (Porait)
	Size	Maximum	A3/Double Letter
5	Document Thickness		52 g/m2 (14lb) to 127 g/m2 (34lb)	Note *1
6	Optical Resolution		400 dpi
7	Output	Binary	100/150/200/240/300/400/600 dpi
	Resolution5	Grayscale	100/150/200/240/300/400 dpi	Simplex
			100/150/200 dpi	Duplex
8	Grayscale level (internal)		1024 levels (10bit)
9	Scanning	Simplex	50ppm, 200dpi, A4, Portrait
	Speed		35ppm, 300dpi, A4, Portrait
	(Engine Speed)		45ppm, 300dpi, A4, Landscape
	Note*2
		Duplex	90ipm, 200dpi, A4, Portrait
			60ipm, 300dpi, A4, Portrait
			80ipm, 300dpi, A4, Landscape
10	Halftone patterns		Dither/ Error diffusion
11	Capacity of ADF		100 sheets (A4, 64 g/m2(17lb))	Note *3
12	Compression		MH/MR/MMR	Note *4
13	Interface		SCSI-2	High Density
	Note *5			50-pin, Female
			Third Party Slot	Note *6,
11

Note *1: The details are described in the chapter 4.

*2: The actual scanning speed might differ due to host computers’ environment.

*3: The maximum number will differ due to the paper thickness. Refer to the chapter 4.

*4: The scanning speed might be slow. The usage with NO COMPRESSION is recommended.

*5: Both SCSI-2 and the Third Party Slot can not be used at the same time.

*6: The Power consumption of the boards should be follows:

-In the Low Power Mode:	Less than 0.35 A
-With IPC-4D option:	Less than 1.5 A
-Without IPC-4D option:	Less than 3.0 A

5-1