Document Quality
This section describes the types and weights of paper that the scanner can read and precautions in preparing documents to ensure maximal scanner functioning.
Document type
The recommended paper type for document is as follows:
•Woodfree paper
•Plain paper (for example, the paper type specified for XEROX 4024)
When using all other type of paper, test feed a few sheets with the ADF to ensure the paper feeds properly before performing a
Any paper can be used or the flatbed. However, grand color specification must satisfy the specification described in the section of Grounding Color Area.
Paper weight
The paper weight should fall within the following ranges:
• 52 to 127 g/m2 (13.9 to 34 lb), 127g/m2 (34lb) for A8
Precautions
The following documents may be difficult to read properly by ADF. A preliminary document feed test may be necessary to avoid unexpected errors. If document slip or jam in the ADF (JAM error) or double feed occurs frequently, read the documents manually by flatbed.
•Paper with clips or staples.
•Paper with wet ink.
•Paper of which thickness is not constantly equal. (like envelope)
•Paper with large rumples or curls. (See NOTE on the next page.)
•Paper with folds or tears.
•Tracing paper.
•Coated paper (for example, some paper used for color printing).
•Carbon paper.
•Paper smaller than A8 (Portrait) size, or larger than A3 or Double Letter.
•Materials other than paper (for example, clothes, metal foil, or OHP film).
•Photographic paper.
•Paper with notches on its side.
•
•Very thin paper.
