Contents of the Setup Mode
This section describes the contents of the setup mode.
No | Item | Description | Selectable | Default |
|
|
| parameters |
|
1 | Double feed check | Specify the double feed detedtion. Double |
| No |
|
| feed is detected by checking the document |
|
|
|
| length and/or paper thickness.** |
|
|
|
|
|
|
|
2 | Length check | Specify the document length to enable | Tolerance: | No |
| =No/10/15/20 mm | double feed detection set the document | No/10/15/20mm |
|
|
| length. |
|
|
|
|
|
|
|
3 | IPC | Scanner automatically sets the recom- | Document: | No |
|
| mended reading parameters. 3 sets of | No |
|
|
| parameters are available when | Sharpen Darken |
|
|
| not installed. | Charactor Copy |
|
|
|
| Quality |
|
|
|
|
|
|
4 | Resetting of abrasion | Reset abrasion counter. | - | - |
| counter |
|
|
|
|
|
|
|
|
5 | Pick start time | Specify the time from document Insertion | Time: |
|
| setting | to the start of picking. User can select | 0.2 to 29.8 sec | 1.0 sec |
|
| most comfortable Pick start time for the |
|
|
|
| job. |
|
|
|
|
|
|
|
6 | Specify the time the scanner waits for next | Time: |
| |
|
| ducument insertion after last document | 27 values from | 30 sec |
|
| scanned. | 1 to 1999 sec |
|
|
|
|
|
|
7 | ADF front offset | Specify the horizontal and vertical offset of | Offset: | Offset: |
| setting* | the front side image by ADF. | H: 0 mm | |
|
|
| V: 0 mm | |
|
|
|
|
|
8 | ADF back offset | Specify the horizontal and vertical offset of | Offset: | Offset: |
| setting* | the back side image by ADF. | H: 0 mm | |
|
|
| V: 0 mm | |
|
|
|
|
|
9 | Flatbed offset setting* | Horizontal and vertical offset of the FB | Offset: | Offset: |
|
| image is specified. | H: 0 mm | |
|
|
| V: 0 mm | |
|
|
|
|
|
10 | IPC status display | The type of IPC option |
|
|
|
| displayed. |
|
|
|
|
|
|
|
11 | SCSI ID setting | SCSI ID is selectable. | SCSI ID: |
|
|
|
| 0/1/2/3/4/5/6/7 | 5 |
|
|
|
|
|
