Reading Mode Setting When the Video Interface Option is Installed
This section describes the button specifications and setup details for each of the simplex
When reading mode is set by the command from the host computer, the following button operation is not required.
NOTE
When the video interface option is installed in the scanner, the scanner automatically recognizes the board and changes the display.
At any time you press 
, scanner returns to screen M1 <Screen M1>
1Turn the power ON and verifty that
“Scanner Ready” is displayed on LCD.
<Screen M2>
2Press 
then the scanner displays
Screen M2.
3Press 
then the scanner displays Screen 1.
<Screen 1>
4 Select ADF or FB by pressing 
or 
then press 
. The scanner displays Screen 2.
<Screen 2>
5Select “Simplex” or “Duplex” by pressing
or 
. Then press Enter. The scanner displays Screen 3.
