Fujitsu C150-E146-02EN manual Setting double feed detection Paper Length

2. Setting double feed detection (Paper Length)

1 Press	or	and let the	<Screen 42>
scanner display Screen 42.

2Press either the or switch to set double feed detection according to paper length. The paper length is checked using the difference between two consecutive sheets of paper fed from the ADF.

Each time either of these switches is pressed,the location of the blinking moves. When the switch is pressed, the blinking moves from (1) to (3). When the switch is pressed, the blinking moves in the opposite direction. However, if the setting by the host computer is valid, the location of the blinking does not move when either switch is pressed.

(1)“No” is blinking:

(2)“Yes” and “1” are blinking:

(3)“Yes” and “2: Stop” are blinking:

Paper thickness is not checked.

Paper thickness is checked. However, a detected double feed error is displayed on the screen only; processing is continued. Paper thickness is checked. When the double feed error is detected, the scan processing is stopped. The error is then reported to the host.

If you want to disable the double feed, select “No” then press . Press to return.

After pressing the , the scanner displays the screen 42-1.

3 Press either the or		switch to set	<Screen 42-1>
double feed detection (paper length).
When the	switch is pressed, the
blinking moves from (1) to (3). When the
switch is pressed, the		blinking moves
in the opposite direction.

(1)The “10” is blinking: Threshold is 10mm

(2)The “15” is blinking: Threshold is 15mm

(3)The “20” is blinking: Threshold is 20mm

7-5