CAUTION
As there is always an off chance a document may be damaged using the
ADF, important original documents should never be fed through the ADF.
Instead, read manually in flatbed mode.
NOTICE
When scanning a translucent document, set the density to light mode.
NOTICE
Carbonless papers have a chemical composition that damages the Pad and Pick roller. Therefore, note the following:
Cleaning: | If miss pick occur frequently, clean the Pad and Pick roller in accordance with the |
| “Cleaning and Maintenance” manual. |
Replacement of parts: The life of the Pad and Pick roller may be shorter than if PPC paper documents are fed.
NOTICE
•The leading edge of all documents fed by ADF should be straightened so the curl of the paper meets the specifications shown below:
More than 30 mm
Less than 3 mm
Feed direction
Read surface
Top of the paper More than 30 mm
Feed direction
Less than 5 mm
Read surface
