Fujitsu fi-4990C manual Set “braking power” according to the table below, Setting, Braking power

Set “braking power” according to the table below.

Setting	Braking power	“Double feed” frequently occurs.	“Mis-pick” or “SF2 ···” frequently occurs.
Thick	Very strong
Medium	Strong
Thick
		Make the braking		Make the braking
Normal	Medium
	(factory default)	power stronger.		power weaker.
Medium	Light
Thin

Thin

Very light

The following is an example of operation when you use this function.

1.In <<SETUP MODE>> initial screen, press

ENTER .

The <<SETUP MODE>> menu screen (Paper Length Check) appears.

2.Press repeatedly until “Paper Separation Level” appears in the lower line of the menu screen.

3.Press ENTER .

The option select screen appears with the current option Normal blinking (blinking indicates “changeable”).

4.Press or .

The displayed option changes (Thick to Thin).

<<SETUP MODE>>

<<SETUP MODE>> Paper Length Check

<<SETUP MODE>>

Paper Separation Level

Paper Separation Level

Normal

Paper Separation Level

Medium Thin

6-18