Fujitsu fi-4990C manual Operation status display, Error status display

Operation status display

After power is turned on, the LCD indicates the following messages in normal mode.

Please wait	Wait for a moment. This is indicated when processing takes a long
	time.
	When this is displayed after turning power on, the second line
	indicates initializing messages.
Ready	The scanner can receive a command from the host computer or
	can be set in setup, browse, or test mode.
Manual Feeding	Load documents on the hopper table manually.
Feeding	The scanner is feeding documents. The second line indicates the
	number of documents fed per batch.

Error status display

When the scanner detects errors, the LCD indicates the following messages. There are two types of errors: temporary errors and equipment errors.

Temporary errors (Ex.):	The message is cleared just by following the next message.
Hopper empty	Mis-pick	Cover open
Equipment errors (Ex.):	To clear the message, you must clean or replace the specified part.
Optical error: Front	Optical error: Back

1-7