Fujitsu fi-4990C manual Setup item, Description, Remarks

Setup item	Description	Remarks
TP_IF baud rate	Selects the control data transfer rate (2400,	Displayed in setup mode selected by turning
	4800, 9600, or 19200) for the TP interface.	power on with	MENU	pressed.
SCSI ID	Sets the SCSI ID of this scanner.	Displayed in setup mode selected by turning
		power on with	MENU	pressed.
Product ID	Sets the product ID of this scanner.	Displayed in setup mode selected by turning
		power on with	MENU	pressed.
Pre-pick	Enables or disables pre-picking.
Pick start time	Sets the period from when paper is loaded
	manually to when the pick operation starts.
Manual feed timeout	Sets the waiting period from when the host
	computer issues a scan command to when
	paper is loaded manually.
Paper pick retry	Sets the pick motor operation time and retry
	count.
Paper feed retry	Sets the feed motor operation time and retry
	count.
Function key	Allocates setup functions to F1 , F2 ,	Displayed in setup mode selected by turning
	and F3 buttons.	power on with	MENU	pressed.
Setup mode lock	Inhibits the operator panel from entering	• Displayed in setup mode selected by turning
	setup mode from normal mode.	power on with MENU		pressed.
		• Setup functions allocated to F1 , F2 ,
		and F3	buttons are always valid
		regardless of this setting.
Language	Select the Operation Panel LCD display
	language (Japanese/English).
White follower mode	Selects the white Level follower operation “0”	Displayed in setup mode selected by turning
	means default “1”means operate like	power on with	MENU	pressed.
	M3099X scanner.
Interface Board slot	Selects the Interface Board Slot “1” or “2”.	Displayed in setup mode selected by turning
		power on with	MENU	pressed.
SCSI Bus Width setting	When connects Narrow SCSI card, Selects	Displayed in setup mode selected by turning
	“8 bit”.	power on with	MENU	pressed.
* Printing Position	Set the Endorser print start position.	The details and the operation method, please
		refer to the “M4099D/M4099DC/fi-4990/fi-4990C
		Image Scanner Operator’s Guide : Option”.

*If the option is not mounted, the set up item for the option does not display on the screen and skips to the next item.

6-5