Fujitsu fi-4990C manual Paper thickness setup, SETUP MODE SETUP MODE Paper Length Check SETUP MODE

11. Press CANCEL two times. Ready

The LCD returns to the Ready screen.

Paper thickness setup

This function sets the paper thickness which is used as the reference for detecting a double feed error. Whether this function is enabled or disabled is determined by the “paper thickness check” function in setup mode.

NOTE

This setting cannot be displayed in browse mode.

The following is an example of operation when you use this function.

1.In <<SETUP MODE>> initial screen, press

ENTER .

The <<SETUP MODE>> menu screen (Paper Length Check) appears.

2.Press twice.

The <<SETUP MODE>> menu screen (Paper Thickness Setup) appears.

3.Press ENTER .

The paper load prompting screen appears, requesting adjustment paper.

4.Select thickest paper used for your jobs and put the paper on the hopper.

<<SETUP MODE>>

<<SETUP MODE>> Paper Length Check

<<SETUP MODE>>

Paper Thickness Setup

Paper Thickness Setup Set the adjustment paper

6-10