SCSI ID
This function sets the ID number for the SCSI interface.
NOTE
You cannot use this function when the setup mode is brought by pressing MENU in the Ready status.
LCD display
Options
Remarks
SCSI ID
0 to 7 (Default: 5)
The following is an example of operation when you use this function.
1.In <<SETUP MODE>> initial screen, press
ENTER .
The <<SETUP MODE>> menu screen (Paper
Length Check) appears.
2.Press 
repeatedly until “SCSI ID” appears in the lower line of the menu screen.
3.Press ENTER .
The option select screen appears with the current setting 5 blinking (blinking indicates “change- able”).
4.Press 
or 
.
The displayed option changes (6, 7, 0, 1, 2, 3, 4).
5. When the desired value appears, press ENTER to save the change.
The LCD returns to the <<SETUP MODE>> menu screen (SCSI ID).
6.To quit the <<SETUP MODE>>, turn off the power.
<<SETUP MODE>>
<<SETUP MODE>> Paper Length Check
<<SETUP MODE>>
SCSI ID
SCSI ID
5
SCSI ID
3
<<SETUP MODE>>
SCSI ID
