Fujitsu fi-4990C TPIF baud rate, SETUP MODE Picking Speed Picking Speed Fast Picking Speed Slow

The following is an example of operation when you use this function.

1.In <<SETUP MODE>> initial screen, press

ENTER .

The <<SETUP MODE>> menu screen (Paper Length Check) appears.

<<SETUP MODE>>

<<SETUP MODE>> Paper Length Check

2.Press repeatedly until “Picking Speed” appears in the lower line of the menu screen.

3.Press ENTER .

The option select screen appears with the current setting Fast blinking (blinking indi- cates “changeable”).

4.Press or .

The displayed option changes (Fast to Slow).

5.Press ENTER to save the change.

The LCD returns to the <<SETUP MODE>> menu screen (Picking Speed).

6.Press CANCEL two times.

The LCD returns to the Ready screen.

<<SETUP MODE>>

Picking Speed

Picking Speed

Fast

Picking Speed

Slow

<<SETUP MODE>>

Picking Speed

Ready

TP_IF baud rate

This function sets the baud rate (signaling speed) according to the baud rate of the third party inter- face (TP_IF).

NOTE

You cannot use this function when the setup mode is brought by pressing MENU in the Ready status.

LCD display

Options

Remarks

TP_IF Baud Rate

2400, 4800, 9600, 19200 (Default: 9600)

Unit: baud

6-31