Consumable counter reset
This function is to be used when the consumable parts are replaced before the accumulated value of the consumable conter reaches to the setting value.
NOTE
You cannot use this function when the setup mode is brought by pressing “MENU” in the Ready status.
LCD display | Options | Remarks |
|
|
|
|
|
|
Consumable Counter | YES, NO (Default) | YES: Reset the accumulated |
Reset |
| consumable counter value. |
|
| NO: cancel the resetting of |
|
| consumable counter value. |
|
|
|
The following is an example of operation when you change the setting.
1.<<SETUP MODE>> initial screen, press
ENTER .
The <<SETUP MODE>> menu screen (Paper Length Check) appears.
2.Press 
repeatedly until “Consumable Counter Reset” appears in the lower line of the menu screen.
3.Press ENTER .
The current option list screen appears with NO blinking. (blinking indicates “changeable”).
4.Press 
or 
.
The displayed option changes (YES blinks).
<<SETUP MODE>>
<<SETUP MODE>> Paper Length Check
<<SETUP MODE>>
Consumable Counter Reset
Reest | Counter Value | ||
| NO |
| 00250000 |
Reest | Counter Value | ||
| YES |
| 00250000 |
