Fujitsu fi-4990C SCSI bus width setting, Interface Board Slot AUTO Interface Board Slot SLOT

3.Press ENTER .

The option select screen appears with the current setting AUTO blinking (blinking indicates “changeable”).

4.Press or .

The displayed option changes (SLOT 1 or SLOT 2 blinks).

5.When the desired option appears, press

ENTER to save the change.

The LCD returns to the <<SETUP MODE>> menu screen (Interface Board Slot).

6.To quit the <<SETUP MODE>>, turn off the power.

SCSI bus width setting

Interface Board Slot

AUTO

Interface Board Slot

SLOT 1

<<SETUP MODE>> Interface board Slot

This function sets the interface of the device by the type of SCSI board mounted in the host computer. Set the 16 bit (Default) when the Ultra Wide SCSI Cards is mounted and set the 8 bit when the narrow SCSI Cards is mounted in the PC.

NOTE

If the SCSI board prohibits a transfer of the 16 bit width data, set the 8 bit instead.

You cannot use this function when the setup mode is brought by pressing MENU in the Ready status.

6-47