Fujitsu fi-5650C 1.1Checking the contents of scanner package, 1.2Names and functions of parts

1.1Checking the contents of scanner package

When you unpack the scanner package, make sure that the package contains all the parts on the list included in the package.

If any parts are missing or defective, contact your sales representative. Handle the scanner and accessories with care.

1.2Names and functions of parts

This section describes the names of parts and their functions .

		TABLE 1.
No.	Name		Function
5	Side guide		Used for adjusting the
	button		side guides.
6	ADF Button		Press this button to open
			the ADF.
7	ADF		It transports a document
	(Automatic		to the reading position
	Document		automatically.
	Feeder)
8	Stacker		Scanned documents are
			ejected from the ADF
			onto this tray. It is
			possible to change the
			height.
9	Stacker		Pull out and set the
	Extension /		stopper to the paper
	Stopper		length.

		TABLE 1.
No.	Name		Function
1	Operator Panel		This panel consists of a
			Function No. display,
			four operating push
			buttons and a LED.
			Operation can be
			conducted from either of
			two sides of the scanner.
			Can be closed and
			compactly stored when
			not in use.
2	ADF Paper		Holds in place the
	Chute		document pages / sheets
			that feed into the ADF.
3	ADF Paper		Please pull out when
	Chute		scanning a long size
	Extension		sheet.
4	Side Guide		It is adjusted to the width
			of the paper in order not
			to scanned skewed pages.

		TABLE 2.
No.	Name		Function
10	SCSI Interface		Used for connecting a
	Connector		SCSI interface cable
			from a PC.
11	SCSI ID		Used for setting SCSI ID
	Switch		(The setting at the factory
			shipment is ID=5).

1-2