3. Click the [QuickScan PRO (trial)] button in the following screen.

4. Install the application following the instructions on the window.

5. Input the requested information and click on the [Next] button.

6. Install the application following the instructions on the window.

Confirming the installation

Please confirm if FUJITSU ISIS scanner driver and ScandAll 21 were installed correctly with the following procedure

1. Load the documents on the scanner.

For loading documents, please refer to Chapter 2 "BASIC SCANNER OPERATIONS" of the "fi-5650C Operator's Guide".

2. Start QuickScan Pro.

Please select [Start], [Programs], [QuickScan] in turn, then click on [QuickScan].

3. Select [Scan], and [Select Scanner...] from the menu bar.

4. Select Fujitsu fi-5650C, then click the [OK] button.

ATTENTION

5. Select [Preview Setting...] from the [Scan] menu.

6. Set the reading resolution and document size, then click [OK].

QuickScan Pro, attached to the Setup CD-ROM is a trial version. Therefore, there is a limitation of 30 program starts. Purchasing this software is necessary if you intent to use this software unlimited. (when installing and using the trial version, please use the displayed serial number. For the operations of QuickScan, please refer to the "Overview of QuickScan" or the "QuickScan Help". Please click [Start], [Program], and then [QuickScan] in turn, and select then the file to refer.

2-11