2.1 | Installing the scanner |
|
| 4. Connecting the AC cable. |
|
|
|
| Open the cable cover located below the |
|
| |||
|
|
|
| ADF paper chute and insert the AC cable |
1. | Place the scanner at its installation site. |
| ||
|
| into the power inlet. | ||
| This scanner can be placed with the ADF |
|
|
|
| paper chute facing either right or left side of |
|
|
|
| the installing location. |
|
|
|
| For details on the scanner’s dimensions |
|
|
|
| and required installation space, refer to "10 |
|
|
|
| SCANNER SPECIFICATION" in the "fi- |
|
|
|
| 5650C Operator's guide". |
|
| Cable |
|
|
|
| cover |
2. Setting the ADF Paper Chute.
Hold the ADF paper chute and insert its tabs into the holes on the rear side of the ADF as shown in the figure below so that the side guides facing upwards.
Once the cable is connected, close the cable cover.
Lead out the AC cable from the conduit located at the bottom of both sides of the cable cover.
<When leading out the AC cable from the right side>
3. Setting the Stacker
Mount the Stacker onto the scanner aligning the protrusions to the holes on the scanner.
You can fix the stacker at two positions: the upper position or the lower position.