This product carries the following label warning label.
The glass surface inside the ADF becomes hot during the operation.
Be careful not to touch the glass surface inside the ADF.
| Do NOT remove from the scanner, stain |
ATTENTION | or scratch the warning labels. |
The screen examples in this manual are subject to change without notice in the interest of product improvement.
If the actual displayed screen differs from the screen examples in this manual, operate by following the actual displayed screen while referring to the User's Manual of the scanner application you are using.
Furthermore, the screenshots in this manual are for FUJITSU TWAIN 32 scanner driver, ScandAll 21 Image Capturing Utility Software,
FUJITSU ISIS scanner driver, QuickScan™ image capturing software and Adobe Acrobat.
About MaintenanceThe user must not perform repairs on this scanner.
Contact the store where you purchased the scanner or an authorized FUJITSU Image Scanner service provider to make repairs to this product.
■Safety Precautions
WARNINGThe following describes important warnings described in this manual.
Do not touch the AC cable with wet hands.
Do not touch the power plug with wet hands. Doing so might cause electric shock.
Do not damage the AC cable.
A damaged AC cable may cause fire or electric shock.
Do not place heavy objects on AC cables, or pull, bend, twist, heat, damage or modify AC cables.
Also, do not use damaged AC cables or power plugs, and AC cables or power plugs when the wall socket is loose.
Use only specified AC cables and connector cables
Use only specified AC cables and connector cables. Failure to use the correct cables might cause electric shock and equipment failure.
Use this scanner only at the indicated power voltage. Do not connect to
Use this scanner only at the indicated power voltage and cur- rent. Improper power voltage and current might cause fire or electric shock.
Also, do not connect to multiple- power strips.
v