<When leading out the AC cable from the left side>
with either the USB or the SCSI interface cable.
| Do not connect both the USB interface |
ATTENTION | cable and the SCSI cable at the same |
| time. It is not possible to use the USB |
| interface with Windows 95 and/or |
| WindowsNT 4.0. |
Do not lead out the AC cable as shown below, since the cable cover may pinch and damage the AC cable.
| Use only the AC cable included the |
ATTENTION | scanner package. |
5. Connect the AC cable to a power outlet.
2.2Connecting the scanner to your PC
When running Windows 95 and/or Windows NT 4.0, connect the scanner to your PC with the SCSI interface cable. When running Windows 98, Windows Me, Windows 2000 and/or Windows XP, connect the scanner to your PC
Connecting the USB Cable
1. Please connect a USB cable to the
Scanner.
Open the cable cover located below the ADF paper chute and connect the USB interface cable to the USB interface connector.
Once the cable is connected, close the cable cover.
2. Please connect the other end of the cable to your PC.
3. Turn ON the scanner.
4. Turn ON your PC.
| Use the USB interface cable provided as |
ATTENTION | an accessory for the scanner. Operation |
| with a commercially available USB cable |
| is not guaranteed. When connecting to a |
| USB hub, be sure to connect to the hub |
| nearest your computer (first stage). If |
| you connect it to a USB hub from the |
| second stage onwards the scanner may |
| not operate correctly. |