Application:

ScandAll 21 (for TWAIN)

QuickScan Pro (for ISIS)

2.3.1For Fujitsu Twain 32 Scanner Driver

Preparation

Before installing the application, please confirm the following items:

Installing the FUJITSU TWAIN32 Scanner Driver

 

Windows XP screenshots are used in

HINT

this section. The windows and opera-

 

tions may slightly vary depending on

 

your OS.

1. Turn the scanner ON.

2. Turn on your PC and log on to

Windows.

Keep the Setup CD-ROM at hand.

Confirm if the scanner is connected to your PC correctly.

If an older version of the FUJITSU TWAIN 32 Driver has already been installed, please uninstall it before installing the new one.

There are two types of FUJITSU TWAIN 32 Drivers. Depending on the operating system (OS) of the computer, the most appropriate driver will be installed automatically.

For Windows 98, Windows Me, Windows 2000, Windows XP:

FUJITSU TWAIN32 V9

For Windows 95 and Windows NT 4.0:

FUJITSU TWAIN32 V8

When using Windows 95 or Windows NT 4.0: ASPI Manager 4.01 or later is required (generally comes with SCSI board products).

ATTENTION

HINT

When using Windows NT 4.0, Windows 2000 or Windows XP, log on as a user with "Administrator" privileges (privileges of the administrator of your PC)

The scanner may be detected automatically. If so, [Found New Hardware Wizard] (or [Add/Remove Hardware Wizard]) dialog box will appear. Click [Cancel] to close the

Wizard window.

For details on connecting the scanner,

HINTrefer to "2.1 Installing the scanner" on

page 2 in this manual.

Uninstall [Scanner Utility for Microsoft

ATTENTIONWindows] in [Add/Remove Programs] of the control panel.

3. Insert the Setup CD-ROM into the CD drive.

The <SETUP DISK START UP SCREEN> will be displayed.

 

This screen may not appear when the

ATTENTION

"Autoplay" setting of your PC is OFF. In

 

this case, run "Install.exe" in this CD-

 

ROM directly by the "Explorer" or "My

 

Computer".

2-5