2.3.2For Fujitsu ISIS Scanner Driver
Preparation
Please confirm the following items before installing the ISIS driver:
•Setup
•Confirm if the scanner is connected correctly to your PC.
About connecting your scanner to the
HINTPC, please refer to "2.1 Installing the scanner" on page 2" of this manual.
Installing FUJITSU ISIS scanner driver
1. Turn on the scanner.
2. Turn your PC on an log on to Windows.
3. Insert the Setup
Drive.
The <SETUP DISK STARTUP SCREEN> will be displayed.
| This screen may not be displayed when |
ATTENTION | the, “Autoplay” setting of your PC is |
| turned off. In this case, please run |
| "Install.exe" on the |
| from explorer or "My Computer". |
4. Click [INSTALL PRODUCTS].
5. Click [ISIS Driver].
ATTENTION
HINT
When using Windows NT 4.0, Windows 2000 and/or Windows XP, please login as a user with "Administrator" privileges (privileges of the administrator of your PC).
In this manual, Windows XP screens are used. The screens and operations might differ slightly depending on your OS.
The scanner is automatically detected and "A detection wizard of the new hardware " or "An addition wizard of new hardware" may be displayed. Please click the [cancel] button and close the wizard screen. (* The screen might differ slightly depending on your OS)
6. The Error Recovery Guide Installation window appears.
Error Recovery Guide is a software providing you with troubleshooting information displayed on the screen when a scanner error occurs. Not installing this software will not have an effect on the performance of the scanner. However it is recommended to install this software.