6. Set the scanning resolution, document size etc. on the [TWAIN driver] window (for setting details of the scanning) and click the [Scan] button.

•Setup CD-ROM

•Confirm if the scanner is connected correctly to your PC.

HINT

About connecting your scanner to the PC, please refer to "2.1 Installing the scanner" on page 2" of this manual.

 

For details about [TWAIN driver],

HINT

refer to the "FUJITSU TWAIN32

 

Scanner Driver User Guide" provided

on the Setup CD-ROM

Installing FUJITSU ISIS scanner driver

1. Turn on the scanner.

2. Turn your PC on an log on to

Windows.

7. The document is scanned and it’s image will be displayed on the ScandAll 21 screen.

If the scanning is performed successfully, the installation has been finished.

ATTENTION

HINT

When using Windows NT 4.0, Windows 2000 and/or Windows XP, please login as a user with "Administrator" privileges (privileges of the administrator of your PC).

In this manual, Windows XP screens are used. The screens and operations might differ slightly depending on your OS.

The scanner is automatically detected and "A detection wizard of the new hardware " or "An addition wizard of new hardware" may be displayed. Please click the [cancel] button and close the wizard screen. (* The screen might differ slightly depending on your OS)

For details about various types of scanning, refer to the "fi-5750C Operator's Guide", provided on the User Manual CD-ROM.

2.3.2 For Fujitsu ISIS Scanner

Driver

3. Insert the Setup CD-ROM into the CD

 

Drive.

 

The <SETUP DISK STARTUP SCREEN>

Preparation

will be displayed.

 

 

Please confirm the following items before installing the ISIS driver:

2-8