7. Select a language used for installation on [Choose Setup Language] window and click [OK].

8. Install the application following the instructions on the window.

9. When the [InstallShield Wizard Com- plete] window appears, click [Finish].

2.When any alarm is displayed on [Hard- ware Installation] window, click the [Continue Anyway] button.

3.Click the [Finish] button.

Now the installation of the scanner driver is completed.

For confirming if the installation was

ATTENTIONsuccessful, perform a scanning operation by using an application that complies with the TWAIN standard such as ScandAll 21.

Installing ScandAll 21

ScandAll 21 is an imaging software, conforming with the TWAIN standards. With the FUJITSU TWAIN 32 scanner driver you can capturescannedimagedatafromthescanner.

When using Windows NT 4.0, Windows

ATTENTION2000 and/or Windows XP, please login as a user with "Administrator" privileges (privileges of the administrator of your PC).

10. Your computer is restarted and the scanner will be detected.

Do not remove the Setup

CD-ROM from the CD drive until your PC will be completely restarted.

 

Depending on the OS, the following

ATTENTION

operations may be necessary.

For Windows 98:

When a request for inserting the CD- ROM of Windows 98 appears, insert it into the CD drive and click the [OK] button.

For Windows 2000:

When [Digital Signature not Found] appears, click [Yes].

For Windows XP

1.When [Found New Hardware Wizard] appears, confirm that the Setup CD-ROM is set in the CD drive, then click the [Next] button.

1. Insertdrive the Setup CD-ROM in your CD-

The, <SETUP DISK STARTUP SCREEN> will be displayed.

2. Click [Install Products].

2-6