Fujitsu fi-5750C Indications on the Function No. display

You can change the overlay on the opeartor panel according to your language.

		TABLE 5.
Name			Function
Function No. display			Indicates the function No.
			and error status.
Buttons	Function		Changes the Function
			activated by the Send to
			button .
	Send to		Launches the linked
			application software
	Scan
LED	Power		Lights when the scanner
			is turned ON.

For details, refer to the "FUJITSU TWAIN32 Scanner Driver User’s Guide", provided in the User Manual CD-ROM, and the "fi-5750C Operator's guide", provided in the Setup CD- ROM.

Indications on the Function No. display

The following shows the indications on the Function No. display.

•8

Blinks only one time upon turning on the scanner.

•P

Indicates that the scanner has been turned ON and is being initialized.

•0

Indicates that initialization will soon be completed.

•1

Indicates that initialization has been completed successfully.

This status is called "Ready Status".

•U

Indicates that a temporary error (that users can solve) has occurred during the initialization or scanning of documents.

"U" and an error number (0, 1, 2, 4) are displayed alternately. To return the scanner to the ready status ("1"), press the "Scan" or "Send to" button while the error is indicated.

•E

Indicates that a device alarm (that users cannot solve) has occurred during the initialization or scanning of documents.

"E" and an "alarm code" (a number or letter) are indicated alternately. To return the scanner to the ready status ("1"), press "Scan" or "Send to" button while the alarm is indicated.

If this alarm occurs, turn the power off and then on again. If the alarm is indicated after turning on the power again, contact an authorized FUJITSU scanner service provider.

1-4