Installing the FUJITSU TWAIN32 Scanner Driver

4. Click [Install Products].

HINT

Windows XP screenshots are used in this section. The windows and operations may slightly vary depending on your OS.

1. Turn the scanner ON.

2. Turn on your PC and log on to

Windows.5. Click [TWAIN Driver] on the window below.

ATTENTION

HINT

When using Windows NT 4.0, Windows 2000 or Windows XP, log on as a user with "Administrator" privileges (privileges of the administrator of your PC)

The scanner may be detected automatically. If so, [Found New Hardware Wizard] (or [Add/Remove Hardware Wizard]) dialog box will appear. Click [Cancel] to close the Wizard window.

6. Error Recovery Guide Installation window appears.

Error Recovery Guide is a software that displays troubleshooting information on screen if any scanner error occurred.

3. Insert the Setup CD-ROM into the CD drive.

The <SETUP DISK START UP SCREEN> will be displayed.

This screen may not appear when the

ATTENTION"Autoplay" setting of your PC is OFF. In this case, run "Install.exe" in this CD- ROM directly by the "Explorer" or "My Computer".

Although you do not install this software, the performance of the scanner would not be affected. However it is recommendable to install this software.

When you select [Yes] for installing Error

ATTENTIONRecovery Guide, [Choose Setup Language] window appears. Select a language and follow the instructions on the window. Error Recovery Guide will automatically start on finishing its installation. Please wait until the installation of TWAIN driver automatically starts.

2-5