• Rear | • ADF |
|
| TABLE 3. | |
|
|
|
|
No. | Name |
| Function |
|
|
|
|
13 | EXT connector |
| Connector port for |
|
|
| optional units. |
14 | USB Interface |
| Used for connecting a |
| Connector |
| USB interface cable from |
|
|
| a PC. |
15 | SCSI Interface |
| Used for connecting a |
| Connector |
| SCSI interface cable |
|
|
| from a PC. |
16 | SCSI ID |
| Used for setting SCSI ID |
| Switch |
| (The setting at the factory |
|
|
| shipment is ID=5). |
17 | Third Party |
| The slot for an option |
| Slot (Optional |
| board. |
| Slot) |
|
|
18 | Side Guide |
| Used for adjusting the |
| Button |
| side guides. |
19 | Power Inlet |
| Used for connecting a |
|
|
| power cable from the |
|
|
| power outlet. |
20 | Power Switch |
| Used for turning ON/ |
|
|
| OFF the scanner. |
| TABLE 4. |
|
|
No. | Name |
|
|
21 | Chute Roller |
|
|
22 | Pick Arm |
|
|
23 | Pick Roller Set |
|
|
24 | Brake Roller |
|
|
25 | Feed Roller |
|
|
26 | Plastic Roller |
|
|
27 | Sheet Guide |
|
|
28 | Ultra Sonic Sensor (Multi feed detection) |
29Glass
1.3Functions of the operator panel
The Operator Panel is located at the right side of the scanner. This panel consists of a function number display, buttons and a LED.