2.1 Installing the scanner
1. Place the scanner at its installation site.
For details on the scanner’s dimensions and required installation space, refer to "10 SCANNER SPECIFICATION" in the "fi- 5750C Operator's guide".
2. Unlock the Shipping Lock.
After placing the scanner to the installation site, switch the Shipping Lock into the opened (unlocked) position.
Horizontal position: Lock
Vertical position: Unlock
3. Remove the ADF Lock Screws.
After placing the scanner to the installation site, remove the ADF Lock Screws and place them into the Storage Holes. For more details about positioning of the ADF refer to "Appendix 4 Setting the position of the ADF" on page 9.
4. Setting the ADF Paper Chute.
Hold the ADF paper chute and insert its tabs into the holes on the rear side of the ADF as shown in the figure below so that the side guides facing upwards.
5. Setting the Stacker
Mount the Stacker onto the scanner aligning the protrusions to the holes on the scanner.
You can fix the stacker at two positions: the upper position or the lower position.
6. Connecting the Power cable.
| Use only the AC cable included the |
ATTENTION | scanner package. |
7. Connect the Power cable to a power outlet.
2.2Connecting the scanner to your PC
When running Windows 95 and/or Windows NT 4.0, connect the scanner to your PC with the SCSI interface cable. When running Windows 98, Windows Me, Windows 2000 and/or