Windows XP, connect the scanner to your PC with either the USB or the SCSI interface cable.
Do not connect both the USB interface
ATTENTIONcable and the SCSI cable at the same time. It is not possible to use the USB interface with Windows 95 and/or WindowsNT 4.0.
Connecting the USB Cable
1. Please connect a USB cable to the
Scanner.
Connect the USB interface cable to the USB interface connector of the scanner.
2. Please connect the other end of the cable to your PC.
3. Turn ON the scanner.
4. Turn ON your PC.
Use the USB interface cable provided as
Connecting the SCSI interface cable
When using the scanner with the SCSI inter- face, you need to purchase a commercially available SCSI cable and a SCSI card.
•SCSI cable
The SCSI has to fit to a 50 Pin half pitch connector and the SCSI card connector of your PC.
•SCSI card
Use the recommended SCSI card noted on the fol- lowing website:
http://imagescanner.fujitsu.com/
When connecting the SCSI interface
ATTENTIONcable, be sure to first connect the SCSI interface cable then turn on the scanner and your PC. Connect the scanner so that it is the terminated device on the SCSI daisy chain.
1. Connect the SCSI cable to the scanner.
Connect the SCSI cable to the SCSI interface connector and make sure it is firmly connected.
2. Connect the other end of the cable to your PC.
ATTENTIONan accessory for the scanner. Operation with a commercially available USB cable is not guaranteed. When connecting to a USB hub, be sure to connect to the hub nearest your computer (first stage). If you connect it to a USB hub from the second stage onwards the scanner may not operate correctly.
HINT
For setting the SCSI ID of the scanner, please refer to the following section.
Setting the SCSI ID
The factory default setting for SCSI ID is "ID 5". If the SCSI ID of another device has already been set to the same ID, change either the scanner's SCSI ID or that of