ATTENTION

This screen may not be displayed when

7. Select an appropriate language used for

the, “Autoplay” setting of your PC is

the installation from the <Choose Setup

Language> window and click [OK].

turned off. In this case, please run

"Install.exe" on the CD-ROM directly from

 

explorer or "My Computer".

 

4. Click [Install Products].

8. Install the application following the instructions on the window.

9. When the [InstallShield Wizard Com- pleted] appears, click on [Finish].

5. Click [ISIS Driver].

6. The Error Recovery Guide Installation window appears.

Error Recovery Guide is a software providing you with troubleshooting information displayed on the screen when a scanner error occurs. Not installing this software will not have an effect on the performance of the scanner. However it is recommended to install this software.

When you select [Yes] for installing Error

ATTENTIONRecovery Guide, [Choose Setup Language] window appears. Select a language and follow the instructions on

10.

ATTENTION

The system is restarted and the scanner will be detected.

Do not remove the Setup CD-ROM until the PC is restarted completely.

Depending on the OS, the following operations may be necessary.

For Windows 98:

When a request for inserting the CD- ROM of Windows 98 appears, insert it into the CD drive and click the [OK] button.

For Windows 2000:

When [Digital Signature not Found] appears, click [Yes].

For Windows XP:

1.When [Found New Hardware Wiz- ard] appears, confirm that the Setup CD-ROM is set in the CD drive, then click the [Next] button.

2.When any alarm is displayed on [Hardware Installation] window, click the [Continue Anyway] button.

3.Click the [Finish] button.

the window. Error Recovery Guide will automatically start on finishing its installation. Please wait until the installation of ISIS driver automatically starts.

Now the installation of the scanner driver is completed.

2-9