4.2.3Reading a document larger than the document board

If the size of the document is larger than the document board, read the document using the following procedure:

1Open the document cover at an angle of about 80°, then slide the cover to the direction of the arrow to remove it.

2Place the document face down on the document bed.

3Place the document cover over the document.

4Read the document.

5After the read operation, remove the document, replace the document cover. Mount the document cover to the original position, and close the document cover.

Document cover

80°

Document bed

Figure 4.2 Removing the document cover

NOTICE: Do not remove the document cover for any other purpose.

4 – 4

Page 23
Image 23
Fujitsu M3093GX, M3093EX manual Reading a document larger than the document board, Removing the document cover