Manuals / Fujitsu / Computer Equipment / Scanner

Fujitsu M3093EX, M3093GX manual Appendix A, A.1 Installation Specifications

Models: M3093GX M3093EX

1 50

Download 50 pages 25 Kb

Page 38

APPENDIX A

A.1 Installation Specifications

Table A.1 Installation specifications

	Item			Specification

External dimensions (mm)			Width	Depth		Height

			530	376		173

Weight (kg)			11

Input power		Voltage	100 to 120 VAC, 200 to 240 VAC

		Number of phases	Single-phase

		Frequency	50/60 Hz

Power			100 VA

Temperature and			Operation		Idle
humidity allowed
humidity allowed		Temperature	5 to 35°C		–20 to 60°C
ranges		Temperature	5 to 35°C		–20 to 60°C

		Humidity	20 to 80%		8 to 95%

A – 1

Image 38

Fujitsu M3093EX, M3093GX manual Appendix A, A.1 Installation Specifications

Contents

M3093EX AND M3093GX IMAGE SCANNER OPERATOR’S GUIDE C150-E022-05ENEdition REVISION RECORDRevised contents Date publishedConventions MAINTENANCE CONTENTSCHAPTER 3 INSTALLATION AND CONNECTIONS COMPONENTSTROUBLESHOOTING FIGURES Cleaning the document cover, document holding pad, and document bedInstallation specifications TABLESSCSI-ID setting LED at an errorCHAPTER 1 PREFACE Table 1.1 The differences between the M3093EX and the M3093GXThis page is intentionally left blank CHAPTER 2 COMPONENTS 2.1 Checking the ComponentsFigure 2.2 M3093EX/GX parts names 2.2 Part Names and Functions2.2.1 Exterior view of image scanner 2.2.2 Functions of each part Presses a document to the document bed2.3 Indicator Functions Figure 2.3 M3093EX/GX Indicators 2.3.1 IndicatorsCHAPTER 3 INSTALLATION AND CONNECTIONS 3.1 Precautions3.2 Removing the Carrier Fixing Bracket 3.3 Connections Page 3.4 Mounting the Stacker 3.5 SCSI-ID Setting Figure 3.1 SCSI-ID setting Table 3.1 SCSI-ID setting4.1 Turning on the Power CHAPTER 4 OPERATIONS4.2 Reading a Document in Flatbed Mode 4.2.1 Reading a standard-size documentTo read a page from a thick book, remember the following points Figure 4.1 Flatbed reading4.2.2 Reading a page from a thick book 3 Do not move the document during the read operation4.2.3 Reading a document larger than the document board Figure 4.2 Removing the document cover4.3 Reading Documents in ADF Mode Section A enlargerd Figure 4.3 ADF paper chute setting A4 or letter size or smaller 4 mm or less 6 Angling the documents Figure 4.4 Loading the document This page is intentionally left blank CHAPTER 5 MAINTENANCE 5.1 Removing Jammed Documents5.3 Cleaning 5.2 Notes on Daily UseEjection roller Clean the roller on the opposite side also 5.3.2 Cleaning the ADFFigure 5.3 Cleaning the ADF Pick spring5.4.2 Replacing pad ASY 5.4 Consumables / Periodical replacement parts5.4.1 Parts number and replacement cycle Figure 5.4 Pick Roller replacement 5.4.3 Replacing pick rollerPage Table 6.1 Check items TROUBLESHOOTINGCHAPTER Table 6.1 Check items continued Paper double feedA.1 Installation Specifications APPENDIX AA.2 External Dimensions Figure A.1 External dimensionsB.1 Test mode for maintenance APPENDIX BTable B.1 LED at an error C.1 Option C.2 IPC-2/CMP-2 option board installationAPPENDIX C 5 Remove the two screws in the following figure 8 Connect the IPC-2 option board connector and tighten the screwScrew A Interface connector screw 7 Remove the cover from the interface PCACMP-2 option board or memory PCA M3093GX not shown Screw for IPC-2IPC-2 option board Screw for memor board or CMP-2 M3093GXThis page is intentionally left blank Page Page Page What is your overall rating of this publication? Reader Comment Form