4-3
Less than
3 mm
Feed direction
Top of the paper Read surface
More than
30 mm
Feed direction
Less than
5 mm
More than
30 mm
Read surface
Top of the paper
CAUTION
As there is always a possibility that a document may be damaged when using the ADF,
important original documents should never be fed through the ADF. Instead, read them manually
in flatbed mode.
NOTICES
1. When scanning a translucent document, set the density to light mode.
2. Carbonless papers have a chemical composition that damages the Pad and Pick roller. Therefore,
note the following:
Cleaning: If misspicks occur frequently, clean the Pad and Pick roller in
accordance with the “Cleaning and Maintenance” manual.
Replacement of parts: The life of the Pad and Pick roller may be shorter than if PPC paper
documents are fed.
3. The leading edge of all documents fed using the ADF should be straightened so the curl of the
paper meets the specifications shown below: