Fujitsu M4097D manual Setting IPC pre-set mode

3. Setting IPC pre-set mode

When you set the use of the IPC pre-set mode, you must set it as follows:

1Press “Next” or “Previous” and let the scanner display Screen 43.

<Screen 43>

NOTICES

Following 2PC Pre-setting can be selected when 2PC-4D is installed. Preset 1: Capture texts in the colored background

Preset 2: Produce good contrast image

Preset 3: OCR Smoothing

Preset 4: Image Smoothing

Preset 5: Dither

Following built-in IPC Pre-setting can be selected even though IPC-4D is not installed.

2At Screen 43, press or to select

the pre-Setting and press to activate the pre-setting. Then the scanner displays Screen 43-1.

<Screen 43-1>

3At Screen 43-1, select “Yes” or “No”.

Note that when you select “Yes”, the IPC setting from the Host computer is ignored. If you select “No”, the IPC setting will be changed according to the

host setting. Finally press .

NOTICE

When you select the Copy Quality, select the scanner and printer settings carefully to get the best quality.

7-6