Button/LED Function
Name of the button and | Function | |
LED |
| |
|
| |
|
|
|
Button | Next | Displays the next LCD screen. |
|
|
|
| Previous | Displays the Previous LCD screen. |
|
|
|
|
| Moves the cursor to the left. |
|
|
|
|
| Moves the cursor to the right. |
|
|
|
| Exit | When you are entering settings on the Operator panel, pressing this button |
|
| returns you immediately to the “Scanner Ready” screen. |
|
|
|
| Enter | Enters the parameter currently selected by the cursor. |
|
|
|
| Send To/ | Operational only when Manual start mode is set or the “Read” lamp lights; |
| Start | Starts the reading when video interface option is used. Some application |
|
| software packages might use this button. |
|
|
|
| Stop | When the “Check” LED lights, pressing this button releases the error status |
|
| (turns off ” Check” and returns to the “Scanner Ready” screen). |
|
| Operational only during the reading operation; stops the reading when the |
|
| video interface option is used. |
|
| Also turns off the “Check” lamp. |
|
|
|
LED |
| Indicates that the scanner is ON. |
|
|
|
| Read | Indicates the scanner is reading or ready to read. |
|
|
|
| Check | • If lit, this indicates that an alarm occurred. Pressing the “Stop” button |
|
| turns the “Check” lamp off. |
|
| • If it blinks at one second intervals, this means that a jam or double feed |
|
| has been detected. If the problem is jammed paper, removing the jammed |
|
| paper turns off the “Check” lamp. If the problem is double feed, pressing |
|
| the “Stop” button turns off the “Check” lamp. |
|
| • If it blinks at four second intervals, this means that cleaning the ADF is |
|
| necessary. |
|
|
|
