<Screen B (Example of ADF Front Offset)>
3At Screen A, if you want to let the offset return to default, select “Yes” otherwise
“No” then press 
. The scanner displays Screen B.
<Screen B (Example of ADF Back Offset)>
<Screen B (Example of FB Offset)>
<Screen C (Example of ADF Front Offset)>
4At Screen B, press 
to increase the
offset or press 
to decrease offset. The increment or decrement is 0.5 mm.
Then press 
to activate the setting. The scanner displays Screen C.
<Screen C (Example of ADF Back Offset)>
<Screen C (Example of FB Offset)>
5At Screen C, press 
to increase the
offset or press 
to decrease the offset.
Then press 
to activate the setting. The scanner displays the next item of the setup mode.
